Parts

Oil pressure gauge kit for Norton Commando 750 and 850 models. This kit takes its feed from the rocker oil feed using the supplied banjo bolt fitting. The oil line runs up to the gauge and is protected with the supplied heat-resistant sleeve where...

Oil pressure gauge kit for Triumph and BSA twins and selected singles. This kit connects through the oil feed point on the timing case and runs the oil line up to a handlebar-mounted gauge. The supplied heat-resistant sleeve helps protect the oil line from...

Oil pressure gauge kit for Triumph and BSA triples. This kit is made for the Triumph T150, Triumph T160, BSA A75 Rocket 3, and Triumph/BSA X75 Hurricane. It connects through the oil feed bolt at the front of the crankcase and runs the oil...

Positive earth BPF LED headlight bulb for classic motorcycles and cars. This bulb replaces the original BPF headlight bulb and provides a brighter white light with lower power draw. It is useful on older charging systems where reducing electrical load can help, while also...

Aftermarket replacement seat cover suitable for Norton Commando 850 Roadster models from 1973 to 1975.Made in black vinyl with the square-top checkerboard pattern, correct grain and stitching, and the period-style gold Norton script across the rear. Designed to fit the original seat base and...

BSA A75R Rocket 3 frame in very good condition. The frame appears straight with no obvious damage or repairs. Currently finished in primer grey, making it ideal for inspection or final paint. Exact year is unknown. Suitable for restoration or project use.

Aftermarket replacement dual seat suitable for Norton Commando Interstate models prior to Mk3.Built on a steel base and finished in black vinyl, it follows the original Interstate profile and includes the period-style gold Norton script across the rear. Supplied complete and ready to fit.Replacement...

12V ignition timing strobe lamp for setting and checking ignition timing on classic motorcycles. A strobe lets you check the timing while the engine is running, rather than relying only on static timing. This is useful on older bikes where points, advance units, wear,...

12V positive earth LED BA7S bulb for warning lights, pilot lights, and instrument illumination on classic motorcycles and cars. It is a direct replacement for a standard BA7S bulb where a 12V positive earth LED is required. The low power draw is useful on...

Basic compression tester kit for checking engine condition on classic motorcycles. A compression test is a quick way to check what is going on inside the cylinder before pulling an engine apart or chasing carburettor and ignition faults. It can help point to worn...

Replica Lucas long stem indicator light assembly. Sold as a Pair Stem length:  5″Stem thread:  7/16″ UNF For various models including:Triumph T100, T120, T140, T150, T160Norton CommandoBSA A65 991190L, 99-1190, 54057567, 60-4105, 60-7172, D4105, D7172

Replica Lucas short stem indicator light assembly. Sold as a pair Stem length:  3-1/8″Stem thread:  7/16″ UNF For various models, including:Triumph T100, T120, T140, T150Norton CommandoBSA A65 991190S, 99-1190, 54057553, 56147, 60-4104, D4104

Brand new Front Brake cover plate, for 8" single leading shoe brake. Triumph 8" Wheel Hub Cover Stainless Steel Fits models 1960 - 67 single leading shoe  Fits Triumph 650 Unit & Pre-Unit Twins (Bonneville, T120R, Thunderbird, Tiger, TR6R, 6T, Etc) from 1960-1965. Although...

Brand new Front Brake cover plate, for 8" twin leading shoe brake. Triumph 8" Wheel Hub Cover Fits models 1969 - 70 twin leading shoe  Suit the Twin Leading shoe (TLS) 1969-70As fitted to T120, TR6 and BSA A65 modelsOD: 230mmID: 60mm OEM: 37-2460,...

Complete Norton Commando 750/850 SS Bolt setFits Mk1 & Mk2 - not MK3Made in England Norton Commando 750,850cc, pre MK3 models Complete set in stainless steel (UNC/BSF threads)

Polished stainless steel spoke & nipple set (40). Fits Norton singles and twins with full width alloy 8" hubs - Commando, Atlas, 650SS etc Fitment: Front and RearHub Type: Full Width Alloy 8"Rim Size: WM2 X 19Gauge: 9Nipples: ·250" Brass Nickel OEM:  021693, 02-1693,...

Brand new fibreglass LH side cover for Triumph T160 Trident Not drilled for badges - easy to do Part number: 83-5690